Frequently Asked Questions No signal or picture When setting up your system, make sure your projector is turned on and a blank image is being projected. Next, turn your computer on. If you have a laptop you may need to disable the display screen on your computer. Now locate the function key on your keypad which reads “LCD”, “CRT” or it may have a computer-like icon. Next press the FN key and the correct function key and you will get the image from the projector only. Screen is scrolling/only getting a partial image In most cases this is caused because the computer’s and projector’s resolution are not completely compatible. All you need to do is adjust the resolution on the computer so it is compatible with the projector’s. This can be done in Windows by going into the main window, double clicking on the Window Setup option and choosing Change Systems Settings in the options menu. Now choose Display and change the setting to match that of the projector. If problems continue, run the picture on the projector screen only. When I turn on my projector it won’t work What to do: First check the outlet the projector is plugged into for power. Next, check to make sure the bulb hasn’t burned out. Check if there is an "indicator" or "status" LED light on the control panel. If there is a light and it is flashing, check the owner’s manual. My remote control does not work First check the batteries. Next, make sure that there are no obstructions between the remote and the projector.